Site Availability Logs
For supported software information, click here.
The Controller device generates site availability logs. The sdwan-branch-disconnect alarm log also reports the same information.
Site Availability Log Message Format
20170228T104103.txt:2017-02-28T18:41:08+0000 sdwanSiteStatusLog, applianceName=Controller1, tenantName=Customer1, siteId=103, siteName=Branch3, applianceId=0, tenantId=2, siteStatus=down, duration=8502827
20170228T104120.txt:2017-02-28T18:41:30+0000 sdwanSiteStatusLog, applianceName=Controller1, tenantName=Customer1, siteId=103, siteName=Branch3, applianceId=0, tenantId=2, siteStatus=up, duration=0
Site Availability Log Message Message Fields
| Field | Description |
|---|---|
| applianceName | Name of the Versa Operating SystemTM (VOSTM) device. This is the name displayed in the output of the show system identification CLI command on the VOS device. |
| tenantName | Name of the organization (tenant). |
| siteId |
Site identifier for the VOS device. To display the site identifier, issue the following command from the CLI on the device. admin@Branch1-cli(config)% show system sd-wan site {site-id 101;} |
| siteName |
Name of the SD-WAN site that generated the alarm. |
| applianceId | VOS device identifier. This field is not used. |
| tenantId | Tenant identifier. This value is allocated internally by the VOS device. |
| siteStatus |
Status of the site:
|
| Duration | Number of seconds the site has been down. This field is set to zero when the site is up. |
Supported Software Information
Releases 20.2 and later support all content described in this article.